​Model 751

​ P​​ortable Zero Air System

​​​ 

 Features

 

  • Portable - under 25 lbs. ready to use
  • Rugged, hand carried case
  • Dew point indicator
  • Silica gel dryer for dew point of -20ºC
  • Long life scrubbers for SO2, NO, NO2, O3, H2S and NH3
  • Optional CO scrubber
  • Easy disassembly for routine maintenance
  • Two-year warranty

 Maintenance

​The following table provides a list of items that  need regular maintenance to ensure your product remains in good working condition.

Item

Action

Frequency

Manual Section

Charcoal Scrubber

Replace

Annually

5.4

Purafil

Replace

Annually

5.5

CO Scrubber (option)

Replace

When Contaminated

5.6

Silica Gel

Replace

When Saturated

5.7

Intake and Final Filters

Replace

When Contaminated

5.9​


 Downloads

  
  
  
751 Manual - 07836.pdf751 Manual1253 KB
SAL000080E - 751.pdf751 Specification973 KB

 Specifications


Output 5 SLPM at 30 psig
Max Delivery Pressure​ 30 psig
Dew Point Less than -20ºC (until desiccant saturated)
Output Concentration
SO2 < 0.1 ppb
H2S < 0.1 ppb
NO < 0.1 ppb
NO2 < 0.1 pp​b
NH3 < 0.1 ppb
O3 < 0.4​​ ppb
CO < 20 ppb​ (requires CO scrubber option)
 Compressor
Single-cylinder, internal long-life, oil-less
piston pump
Power Requirements 110V-120V, 60Hz (105W)
220V-240V, 50Hz (130W)​
Operating Temperature Range 5 - 40ºC
Dimensions (HxWxD) 7” x 18.5” x 14” (178 x 470 x 356 mm)
Weight


Specifications are subject to change without notice.
All specifications are based on constant conditions.​
24 lbs (10.9 kg) ​

 Description

The Model 751 is a fully self-contained portable source of clean, dry air for use with dilution calibrators.  It removes particulate and potential interferents from ambient air to create zero air suitable for calibration. It can also be used to provide purge air for permeation tube ovens. 

Contained in a high-density plastic travel case, the Model 751 includes a dew point sensor, an internal oil-free piston pump, and scrubbers to remove SO2, NO, NO2, O3, H2S and NH3.  An optional high performance scrubber is available to remove CO. Warm-up time required for use is just 30 minutes. 

The silica gel dryer removes water and produces output with a dew point of -20ºC up to a 5 SLPM flow rate.  The dew point LED indicator lets you know when desiccant should be replaced.  Components are engineered with a quick dismount from the case to allow rapid periodic maintenance.